Epson EX-1000 Guide de l'utilisateur télécharger pdf (Page 22)

Micro Feed

The Micro Feed facility is useful if you wish to align the paper exactly. It

feeds the paper forwards or backwards in 1/216th inch increments.

To use this feature, put the printer off-line (using the :IKLIF~ button).

Then press the 5 ~~

(ONLINE) button, and either the /p*pEE; button (to feed the

paper forwards), or the EFEG3 button (to feed the paper backwards).

Holding down these buttons continuously will continue to feed the paper for-

wards or backwards in small increments.

BUFFER CLEAR/RESET

It is possible to clear the buffer of the printer or to return it to its power-on

status by using the front panel buttons without having to turn the power off

and on. To do this, put the printer off-line (press the OEM button), and then

press the CON button again. Before releasing the -ON button, hold

down the :~OFIT button. Releasing the : %F; button within two seconds of

holding it down (before releasing the 1C%!C button) will clear the data in

the buffer. Releasing the button after two seconds (again, before releasing

fie (-FLlNf ‘1

button) will reset the printer back to the settings at power-on.

TEST AND MAINTENANCE SETTINGS

The printer is equipped with a number of functions to assist testing and main-

tenance. Since it is anticipated that they will not be used very often, they are

not described here, but in Chapter 6.

However, briefly, they are:

l A text test print mode

l A short test print mode

l A long test print mode

l A hexadecimal dump mode

l A bidirectional print test

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 117 118

Pas de commentaire

Epson EX-1000 Guide de l'utilisateur Page 22