Epson C82324* Guide de l'utilisateur télécharger pdf (Page 39)

Enter one of the following hexadecimal values for C= ethernet_type:

To configure the Ethernet Card for 802.3 only use 0001 through

05FF.

To configure the Ethernet Card for the Ethernet II type 8137, use

8137

To configure the Ethernet Card for both 802.3 and the Ethernet II

type 8137, use 0000.

If your network uses an Ethernet II type other than 8137 enter the

appropriate type for C=ethernet_type.

Example: EPCONFIG 06400078 N=e C=0600 (sets Ethernet II type

600.)

Restore factory Defaults

EPCONFIG serial-number N=E VA

This command returns all of the values discussed in this chapter to

their factory defaults.

Because this command deletes the master file server, you must

reinstall the print server with EPSETUP to re-assign a master file

server.

Caution:

Once you send this command, you must wait for a message to

appear indicating the operation is complete before turning off the

printer. Turning off the printer before completion could erase the

interface’s memory; this could make the interface board unusable.

Changing the Configuration

2-15

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 56 57

Pas de commentaire

Epson C82324* Guide de l'utilisateur Page 39