Epson 400 Manuel d'utilisateur télécharger pdf (Page 83)

Transporting the Printer

If you need to transport your printer some distance, carefully

repack it using the original box and packing materials as

follows:

1. Open the printer cover and make sure that the print head is

in the home (far right) position. If not turn on the printer

and wait until the print head returns to the home position.

Turn off the printer and then close the printer cover.

Caution:

Leave the ink cartridges installed when you transport the

printer. Removing the cartridges during transport can

damage the printer.

2. Unplug the power cord from the electrical outlet; then

disconnect the interface cable from the printer.

3. Remove the paper from the sheet feeder and remove the

paper support.

4. Push in the output extension tray, and then raise the output

tray.

5. Attach the protective materials to the printer.

6. Repack the printer and power cord in the original box.

7. Keep the printer level during transport.

Hawaii2 Ref. Guide

Rev.b

A5 size Chapter 5

06-02-97 DR, pass 0

5-8

Maintenance and Transportation

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 147 148

Pas de commentaire

Epson 400 Manuel d'utilisateur Page 83