Epson PowerLite 54c Guide de l'utilisateur télécharger pdf (Page 23)

Setting Up the Projector 23

2. Connect the yellow RCA plug on the two-connector end of the

cable to the projector’s yellow

Video jack as shown below.

3. Connect the other yellow plug to the video-out jack on your video

source.

4. To play sound through the projector, connect the black audio

plug on the RCA A/V cable to the projector’s

Audio2 jack.

5. Connect the red and white plugs on the other end of the cable to

the corresponding audio output jacks on your video source.

6. After you turn on your projector, be sure to:

■ If more than one device is connected to the projector, select

Video when you want to project this source. See page 30.

■ Open the Audio menu and make sure Audio 2 is selected for

the

Audio Input setting. See page 51.

note

The Audio menu also lets

you adjust the volume.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 105 106

Pas de commentaire

Epson PowerLite 54c Guide de l'utilisateur Page 23