Epson 5550C - PowerLite SVGA LCD Projector Guide de l'utilisateur télécharger pdf (Page 57)

Turning the Equipment On and Off

It’s best to turn on the projector and its attached equipment in the

following order:

1. Video source (such as a VCR), if your video source is not your

computer

2. Audio source (if different from the computer or video source)

3. External amplified speaker or PA system (if you’ve connected

one)

4. Projector (see instructions below)

5. Computer

When you’re ready to turn off the equipment, do so in the reverse

order.

Turning the Projector On and Off

Before you turn on the projector, make sure it is plugged in and

connected to your video source.

1. Remove the projector lens cap.

2. Turn on the main power switch located at the rear of the

projector and wait until the power light turns orange.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 177 178

Pas de commentaire

Epson 5550C - PowerLite SVGA LCD Projector Guide de l'utilisateur Page 57