Epson 5000XB - PowerLite SVGA LCD Projector Guide de l'utilisateur télécharger pdf (Page 49)

Turning the Equipment On and Off

Always turn on the projector and its attached equipment in the

following order:

1.Video source (such as a VCR), if your video source is not your

computer

2.Audio source (if different from computer or video source)

3.Projector

4.External amplified speaker or PA system (if necessary)

5.Computer

Turning the Projector On and Off

1.Remove the projector lens cap.

2.Press the Power button on the remote control or control panel.

The green power indicator comes on.

If computer or video equipment is attached, the computer or video

signal is projected.

Allow about 30 seconds for full illumination.

✦

Warning: Never look into the lens when the lamp is on. This can damage

your eyes. It is especially important that children not look into the lens.

pro-ch2.fm Page 31 Monday, November 10, 1997 1:36 PM

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 123 124

Pas de commentaire

Epson 5000XB - PowerLite SVGA LCD Projector Guide de l'utilisateur Page 49