Epson 1925W - POWERLITE Multimedia Projector Guide de l'utilisateur télécharger pdf (Page 148)

Power light Lamp light Temperature Status and solution

light

Red Off Flashing orange Projector is too hot.

• Make sure that the vents and air filter are not

clogged with dust or obstructed by nearby

objects.

• Make sure the environmental temperature is not

too hot.

Red Off Red Projector has overheated and turned off. Leave it

turned off to cool down for five minutes.

• Make sure that the vents and air filter are not

clogged with dust or obstructed by nearby

objects.

• If operating the projector at high altitude, turn on

High Altitude Mode.

• If overheating continues, replace the air filter.

• If the problem persists, unplug the projector and

contact Epson for help.

Red Flashing red Off Lamp or lamp cover has a problem.

• Close the lamp cover securely.

• Check to see if the lamp is burned out, broken,

or installed incorrectly. Reseat or replace the

lamp as necessary.

• Make sure that the vents and air filter are not

clogged with dust or obstructed by nearby

objects.

• If operating the projector at high altitude, turn on

High Altitude Mode.

• If the problem persists, unplug the projector and

contact Epson for help.

Orange Flashing Off Replace the lamp soon to avoid damage. Do not

orange continue using the projector.

148

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 197 198

Pas de commentaire

Epson 1925W - POWERLITE Multimedia Projector Guide de l'utilisateur Page 148