Epson 1705C - PowerLite XGA LCD Projector Guide de l'utilisateur télécharger pdf (Page 57)

Replacing Consumables

After you turn off the projector's power and the

confirmation buzzer beeps twice, disconnect the

power cable.

Wait until the lamp has cooled down, then remove

the lamp cover.

Loosen the lamp cover fixing screw with the screwdriver supplied

with the new lamp or a + head screwdriver. Then slide the lamp

cover straight forward and lift it to remove.

Loosen the two lamp fixing screws.

Take out the old lamp.

If the lamp is cracked, replace it with a new lamp, or contact your

local dealer for further advice. If replacing the lamp yourself, be

careful to avoid pieces of broken glass.

Procedure

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 76 77

Pas de commentaire

Epson 1705C - PowerLite XGA LCD Projector Guide de l'utilisateur Page 57