Epson Stylus NX300 Manuel d'utilisateur télécharger pdf

Choose your settings

Select your language:

1 Press Menu to enter the setup mode.

2 Press or to select Maintenance, then press OK.

3 Press or to select your Language,

then press OK.

4 Press or to select your laguage,

then press OK.

If anything is missing, contact Epson as described on the back

in “Any questions?”.

Caution: Do not open the ink cartridge package until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove sticker(s) from the backing

sheet and place over corresponding text on the control panel.

Unpack

Start Here

2 Open the output tray, pull out the extension, and raise the paper

stopper.

3 Slide the edge guide to the left while holding the feeder guard forward.

4 Load paper against the right edge guide and behind the tab, with the

printable side face up.

Note: Don’t load the paper sideways;

always load it short edge first.

5 Slide the edge guide over.

5 Insert the cartridges in the holder for each color.

6 Press each cartridge down until it clicks.

7 Close the ink cartridge cover and press it down until it clicks.

8 Close the scanner.

9 Press the OK button to charge the ink. Charging takes about 2 minutes.

Caution: Don’t turn off the NX300 Series while it is charging or you’ll

waste ink

(Included for Canada only)

Epson Stylus

NX300 Series

1 Connect the power cable.

Caution: Do not connect to your computer yet.

2 Press the On button.

Turn on the NX300 Series

Install ink cartridges

Note: Don’t load paper before installing the ink cartridges.

1 Open the scanner.

2 Open the cartridge cover.

3 Shake the ink cartridges,

then unpack them.

4 Remove only the yellow tape from each

cartridge.

Caution: Don’t remove any other

seals from the cartridges.

Load paper

1 Open the paper support and pull up the extension.

To use the NX300 Series for faxing, connect the included phone cord from

a telephone wall jack to the LINE port on the NX300 Series. To connect a

telephone or answering machine, see the Quick Guide for instructions.

Note: If you’re connecting to a DSL phone line, you must use a DSL filter or

you won’t be able to fax. Contact your DSL provider for the necessary filter.

Connect the phone cord

Select your country:

1 Press or to select Country/Region,

then press OK.

2 Press or to select your Region,

then press OK.

3 If you change the region, confirm your

selection at next screen by pressing the

1 key (for yes) on the numeric keypad.

Enter the date and time:

1 Press or to select Daylight Saving Time, then press OK.

2 Press or to select Summer, if your

region uses Daylight Saving Time and

it’s currently in effect. (DST is effective

from spring to summer.) Otherwise select

Winter to turn off the setting.

3 Press OK.

4 Press or to select Date/Time, then press OK.

5 Press or to select the type of

date display, then press OK.

6 Use the numeric keypad to change

the date, then press OK.

7 Press or to select a 12-hour or 24-hour

display, then press OK.

8 Use the numeric keypad to set the time.

9 If you selected 12h, Press or to

select AM or PM.

10 Press OK.

When you’re finished choosing your settings, press Menu to exit.

Auto Answer/

Space

Redial/Pause

Stop/

Clear Settings

B&W

Color

Copy/Fax

Speed Dial

Group Dial/

Backspace

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - Start Here

Choose your settingsSelect your language: 1 Press Menu to enter the setup mode. 2 Press or to select Maintenance, then press OK. 3 Press or to

Page 2

Choose your settingsSelect your language: 1 Press Menu to enter the setup mode. 2 Press or to select Maintenance, then press OK. 3 Press or to

Page 3

Choose your settingsSelect your language: 1 Press Menu to enter the setup mode. 2 Press or to select Maintenance, then press OK. 3 Press or to

Page 4

Choose your settingsSelect your language: 1 Press Menu to enter the setup mode. 2 Press or to select Maintenance, then press OK. 3 Press or to

Page 5 - Install software

5 When prompted, connect the USB cable. Use any open USB port on your computer. Note: If installation doesn’t continue after a moment, make sure you

Page 6

5 When prompted, connect the USB cable. Use any open USB port on your computer. Note: If installation doesn’t continue after a moment, make sure you

Page 7

5 When prompted, connect the USB cable. Use any open USB port on your computer. Note: If installation doesn’t continue after a moment, make sure you

Page 8

5 When prompted, connect the USB cable. Use any open USB port on your computer. Note: If installation doesn’t continue after a moment, make sure you

Commentaires sur ces manuels

Pas de commentaire

Epson Stylus NX300 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Imprimer et scanner Epson Stylus NX300. Epson Stylus NX300 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Epson Stylus NX300