Epson Epson Stylus NX330 Guide de l'utilisateur télécharger pdf (Page 21)

Solving Problems

If you have a problem with your product, check the messages on the LCD screen to

diagnose the cause.

You can also check “Problems and Solutions” on page 22 for basic troubleshooting

suggestions, or see your online User’s Guide for more detailed help.

Note: Breakdown or repair of this product may cause loss of network data and settings.

Epson is not responsible for backing up or recovering data and settings during or after

the warranty period. We recommend that you make your own backup or print out your

network data and settings.

Error Indicators

If you see one of the error codes below, follow the steps here to proceed.

Note: When an error code appears, it will be located in the upper-right corner of the

LCD screen.

Error code Problem and solution

W-02 Paper is jammed. Carefully remove the paper jam (see page 23), turn off the

printer, then turn it back on.

W-03 Paper is jammed. Open the scanner unit, remove the jammed paper and press

W-10 The ink cartridge(s) shown on the LCD screen have not been installed. Install the

cartridges.

W-12 Cannot recognize the ink cartridge(s) shown on the LCD screen. Replace the ink

cartridge(s).

W-13 Press

to resume printing. Then contact Epson to replace parts that are nearing

the end of their service life.

E-10 Parts inside your Epson printer are at the end of their service life. Contact Epson

for help (see page 25).

E-01 Turn your Epson printer off, make sure no paper is jammed inside (see page 23),

and turn it back on. If the error is not resolved, contact Epson for help (see

page 25).

E-02

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Pas de commentaire

Epson Epson Stylus NX330 Guide de l'utilisateur Page 21