Epson Wireless Pendant Microphone Kit for PowerLite Pilot Guide de l'utilisateur télécharger pdf (Page 5)

Introduction 5

■ Never loosen any bolts, screws, or nuts after installation. Periodically check to make

sure that none of them have come loose. If you find loose hardware, retighten it

firmly.

■ Before moving the system, be sure to check that the Connection & Control Box

power is turned off, the plug is disconnected from the outlet, and all cables are

disconnected. Fire or electric shock may result.

■ Do not use or store the system where the temperature is too high or too low. Avoid

places where the temperature changes frequently and rapidly.

Additional Safety Instructions

■ Do not install this product where it may be subject to impact or vibration.

■ Never disassemble or modify the product in any way. Dangerous electrical voltages

inside the components can severely injure you.

■ Be careful not to pinch your fingers when installing the IR receiver unit into the

Connection & Control Box.

■ Use a dry cloth (or, for stubborn stains, a moist cloth that has been wrung dry) for

cleaning. Do not use liquid, aerosol cleaners, or solvents such as alcohol, thinner, or

benzine.

■ Turn off the microphone power after use.

Parts List

Before starting, make sure you have all the parts listed below. If you’re missing any parts,

contact Epson as described on page 16.

Pendant microphone

Coaxial cableIR dome sensor

Neck strap AA alkaline batteries

IR receiver module

1 2 3 4 5 6 7 8 9 10 ... 39 40

Pas de commentaire

Epson Wireless Pendant Microphone Kit for PowerLite Pilot Guide de l'utilisateur Page 5