Epson Ensemble HD Manuel d'utilisateur télécharger pdf (Page 6)

Important Safety Instructions

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts

inside. Refer servicing to qualiﬁed personnel.

CAUTION: ese servicing instructions are for use by qualiﬁed service personnel only. To reduce the risk of

electric shock, do not perform any servicing other than that contained in the operating instructions unless you

are qualiﬁed to do so.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

e lightning ﬂash with arrowhead, within an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be

of suﬃcient magnitude to constitute a risk of electrical shock to persons.

e exclamation point within an equilateral triangle is intended to alert the user to the presence

of important operating maintenance (servicing) instructions in the literature accompanying

the appliance.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. e

wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Additional Safety Instructions

• Safety measures must be practiced at all times during the installation of the home theater system. Proper

installation procedures, as outlined in these instructions, must be adhered to. Failure to do so could result

in serious personal injury or death.

• e home theater system should be installed by a professional audio/video installer or other qualiﬁed

professional. Epson cannot provide advice concerning construction practices or building codes in your area.

• Prior to installing the home theater system, read the installation instructions completely. Keep these

instructions in an easily accessible place for future reference.

• Do not attempt to install this system if you have any doubts as to its proper assembly and installation.

• Use proper equipment to prevent personal injury or property damage, such as a ladder for reaching high

places or a stud ﬁnder to locate the center of studs.

• e included mounting hardware is intended for use with wooden studs/joists or solid concrete

construction. e hardware is not intended to secure any part of the system to metal studs, wallboard or

plasterboard, or cinder block wall construction.

• Do not attempt to use hollow-wall anchors, screws, or similar mounting hardware to mount the projector

or screen to wallboard or plasterboard. e projector and screen cannot be safely mounted like that. You

must mount the projector and screen to wooden studs/joists or to a solid concrete surface, as outlined in

these instructions.

• When installing the mounting hardware in concrete, verify that the concrete is at least the same depth as

the anchors, and that the anchors will not rest against a layer of plasterboard or other material. Concrete

must meet ASTM C-90 speciﬁcations and be 2000 psi density minimum. Lighter-density concrete may

not hold the anchors.

• e wall or ceiling structure on which the screen is mounted must be capable of safely supporting the

weight of the screen (approximately 100 pounds). Likewise, the ceiling structure must be capable of safely

supporting the weight of the projector assembly (approximately 50 pounds). If the structures cannot

support these weights, they must be reinforced.

• When mounting the equipment on a wall or ceiling that contains studs or joists, the exact center of the

studs or joists must be conﬁrmed prior to installation.

• Do not install the projector or screen where it may be subject to impact.

• Do not install the projector or screen in direct sunlight or near a heater vent, ﬁreplace, or other source of heat.

• Two persons are required to lift the screen onto its mounting brackets. It is recommended that a second

person should also assist in performing other parts of the installation, such as mounting the projector and

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire

Epson Ensemble HD Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Epson Ensemble HD