Epson P-4500 Manuel d'utilisateur télécharger pdf (Page 226)

Options

Problem

Using the cut sheet

feeder, the paper does

not feed properly.

The LOAD/EJECT

button is pressed, but

the platen does not

move and the paper

does not feed.

After a print

command is sent from

the computer, the

platen does not move

and the paper does not

feed.

Solution

You may be pressing the

LOAD/EJECT

button while the printer is on line. Always

put the printer off line before feeding the

paper. Paper feeds automatically when the

cut sheet feeder receives a print command

from the computer (only while the printer

is on line).

The printer may be off line. Press the ON

LINE

button to put the printer on line.

The cut sheet feeder mode may be off. Set

DIP switch 1-8 to on. If your program

allows you to use control codes, use ESC

EM 4 to set the cut sheet feeder mode. The

printer must be ready with no paper out

condition to receive this command. Send

the command with continuous paper

loaded and with the paper select lever in

the continuous paper position.

7-24

Troubleshooting

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 316 317

Commentaires sur ces manuels

Pas de commentaire