Epson PowerLite Cinema 500 Guide de l'utilisateur télécharger pdf (Page 55)

Changing the Remote Control’s Batteries 55

Changing the Remote Control’s Batteries

The remote control uses two AA batteries. If you suspect they are weak, take the remote

control to a darkened room and press the illumination button. If the buttons on the

remote control do not glow red, replace the batteries as described below.

Warning: Keep batteries away from children. If a battery should be swallowed, contact your

doctor immediately.

1. Release the tab and lift open the cover.

2. Remove the old batteries and insert new AA batteries as shown.

3. Replace the cover.

Storing the Projector

If you need to store the projector for an extended time, do the following:

■ Make sure the temperature and humidity of the storage area are within the recommended

range for the projector (14 to 140 °F [-10 to 60 °C] and 10 to 90% relative humidity).

■ Attach the lens cover and retract the feet.

■ Remove the batteries from the remote control.

■ Pack the projector in its original packaging or equivalent.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 83 84

Pas de commentaire

Epson PowerLite Cinema 500 Guide de l'utilisateur Page 55