Epson EX100 Guide de l'utilisateur télécharger pdf (Page 48)

48 Fine-Tuning the Projector

3. Select

Color Adjustment and press Enter. You see hue and

saturation controls on the screen for six colors:

RGBCMY (red,

green, blue, cyan, magenta, and yellow.

4. Select the color axis you want to adjust and press

Enter. You see

color controls for hue and saturation.

Hue changes the balance of color, and saturation changes the

strength of the color.

5. Use the pointer button to adjust the hue and saturation. You

see the adjustments reflected on the screen. When you are satisfied

with the color, press

Esc.

6. Repeat steps 4 and 5 for each color axis you want to adjust.

You may need to readjust the color as the lamp in your projector

changes over time.

Adjusting Signal Settings

Although the projector normally detects and optimizes the input

signal automatically, you can use the Signal menu to make manual

adjustments. In addition to changing the position of the projected

image, you can correct tracking and sync for computer images, or

change the aspect ratio to widescreen format for video images.

1. Press the

Menu button and select the Signal menu.

You see a screen similar to one of those below. (The settings will

be different depending on the source you are projecting from.)

note

You can also use the remote

control’s

Auto button to

automatically reset the

projector’s tracking, sync,

resolution, and position

settings. See page 23 for

details.

Computer/RGB Video

Component Video Composite Video/S-Video

EX100_User's Guide.book Page 48 Wednesday, April 30, 2008 12:08 PM

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 97 98

Pas de commentaire

Epson EX100 Guide de l'utilisateur Page 48