Epson PowerLite 62c Guide de l'utilisateur

Naviguer en ligne ou télécharger Guide de l'utilisateur pour Boîtiers de commutation en série Epson PowerLite 62c. Epson PowerLite 62c User`s guide [en] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 6
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Choosing a location
The projector supports 4 viewing setups. Choose the best one for
your environment. If you install the projector in a rear or overhead
position, you’ll need to choose the correct projection option,
identified below, from the Extended menu. See the User’s Guide
on your CD-ROM for instructions.
Table
Convenient for temporary front projection.
Choose Front from the menu.
Ceiling
Professional installation recommended.
Choose Front/Ceiling from the menu.
Rear
For permanent installation behind a
translucent screen. Choose Rear
from the menu.
Rear/Ceiling
Professional installation behind a translucent
screen recommended. Choose Rear/Ceiling
from the menu.
The distance between the projector and the screen determines the
size of the image. The diagram below shows approximately how big
your image will be, based on where you set up the projector.
1
Unpack the projector
You should have the following items:
Quick Setup
2
Connect your video source
The projector has 4 video connectors, as shown below. Each one requires a
different type of cable. A computer cable is included. You can purchase optional
video cables through Epson or at local electronics stores. You can connect up
to 4 video devices and use the remote control to switch among them.
1 Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
The projector connectors from highest to lowest quality are
Computer1(Component) or Computer2(Component), S-Video,
and Composite Video.
2 Make sure you have the right cable(s) for the connection(s) you want
to use, and the cables are long enough for your setup. If you need
a cable longer than the standard 6 to 10 feet, you may need a
distribution amplifier. (See the back page for accessory information.)
3 Before you connect your equipment, make sure everything is turned off.
4 Connect your video equipment to the projector.
Turn over
Projector
Power cord
Computer cable
User’s Guide
CD-ROM
Carrying case
RCA video cable
(composite
video)
S-Video
cable
Component
video to
VGA cable
Computer
cable
(included)
Password protect
sticker
Distance from projector to screen (ft.)
29.5(Wide)–35.4(Tele) ft.
(in.)
19.6–23.6
9.8–11.7
7.8–9.4
5.8–7.0
4.8–5.8
2.83.4
3.8–4.6
Epson
®
PowerLite
®
62c/82c
3
Set up the remote control
1 Remove the battery cover.
2 Insert the batteries.
3 Replace the battery cover.
The remote control is ready for use.
Projector
remote control
To play back audio through the projector, you can connect an audio
cable from your video device to the audio in ports on the projector.
See the User’s Guide on your CD-ROM for instructions.
NOTE
Audio in ports
Vue de la page 0
1 2 3 4 5 6

Résumé du contenu

Page 1 - Quick Setup

Choosing a locationThe projector supports 4 viewing setups. Choose the best one foryour environment. If you install the projector in a rear or overhea

Page 2

Choosing a locationThe projector supports 4 viewing setups. Choose the best one foryour environment. If you install the projector in a rear or overhea

Page 3

Choosing a locationThe projector supports 4 viewing setups. Choose the best one foryour environment. If you install the projector in a rear or overhea

Page 4 - User’s Guide

5Adjust the image1 To raise the image, press the foot adjust button and lift the frontof the projector. Release the button to lock the foot in the pos

Page 5

5Adjust the image1 To raise the image, press the foot adjust button and lift the frontof the projector. Release the button to lock the foot in the pos

Page 6

5Adjust the image1 To raise the image, press the foot adjust button and lift the frontof the projector. Release the button to lock the foot in the pos

Commentaires sur ces manuels

Pas de commentaire