Epson R320 Guide de démarrage rapide télécharger pdf

Unpack

1 Remove everything from the box.

2 Remove all the tape and

packing material from

the printer.

3 Open the output tray and the printer cover.

Then remove the tape.

Make sure the CD/DVD tray guide

is closed completely.

Turn On the Printer

3 Unwrap the ink cartridges.

4 Open the cartridge cover and remove the paper insert.

5 Lower each cartridge into its holder with the green circuit board facing the front.

The color of the cartridge label should match the marker above the cartridge holder.

Then gently push each ink cartridge down until it is firmly seated.

6 Close the cartridge cover.

7 Press the Maintenance button and close the printer cover.

CAUTION: Don’t turn off the printer or interrupt charging while the light is flashing or

you’ll waste ink.

A progress bar is displayed on the LCD panel during ink charging.

8 After ink charging is finished, press OK.

1 Plug the printer’s power cord into a grounded electrical outlet.

STOP: Do not connect the printer to your computer yet. Wait until you are instructed

to connect the USB cable in section 5, “Install Software.”

2 Press the Power button to turn on the printer.

CAUTION: Never use an external switch, such as a wall switch or power strip switch,

to turn the printer on or off.

CD position

check paper

Small CD

insert

Printer

Printer Basics

Printer Software

CD-ROM

CD/DVD tray

Quick Reference

Ink cartridges

Turn over

Make sure the tray guide is

up after removing the tape

1 Flip open the paper support and pull up the extension.

2 Open the printer cover.

Install the

Ink Cartridges

Install the

Ink Cartridges

Don’t touch the green circuit

board or remove any labels

continue

Epson Stylus Photo R320

CPD-18377

4050614-00

XXX

Epson Stylus

Photo R320

Start

Here

Start

Here

1 2 3 4 5 6

Résumé du contenu

Page 1 - Turn over

UnpackUnpack1 Remove everything from the box. 2 Remove all the tape and packing material from the printer.3 Open the output tray and the printer cover

Page 2

UnpackUnpack1 Remove everything from the box. 2 Remove all the tape and packing material from the printer.3 Open the output tray and the printer cover

Page 3 - Epson Stylus Photo R320

UnpackUnpack1 Remove everything from the box. 2 Remove all the tape and packing material from the printer.3 Open the output tray and the printer cover

Page 4 - Macintosh

Install SoftwareInstall SoftwareWindows®The software works with Windows 98SE, Me, 2000, and XP. Make sure your printer is NOTconnected to your compute

Page 5

Install SoftwareInstall SoftwareWindows®The software works with Windows 98SE, Me, 2000, and XP. Make sure your printer is NOTconnected to your compute

Page 6

Install SoftwareInstall SoftwareWindows®The software works with Windows 98SE, Me, 2000, and XP. Make sure your printer is NOTconnected to your compute